Lintho tsa 0

Nako Belt Pulley

Li-pulleys tsa nako ke mofuta o ikhethileng oa pulley o nang le meno kapa mekotla e potileng bophara ba kantle ba 'mele oa pulley. Meno ana kapa lipokotho li sebelisetsoa nako eseng phetiso ea motlakase. Li-pulleys tsa nako li kopana le mabanta a lekanang a nako ea li-pitch ka li-drive tse lumellanang. Li-pulleys tsena ke likarolo tsa koloi tse sebelisetsoang ho fetisa ho sisinyeha ho tsamaeang lipakeng tsa axis e tšoanang. Li-pulleys tse entsoeng ke matla a kamehla li fana ka ts'ebetso e ts'epahalo ka tlhokomelo e nyane haholo. Nako le nako tlhokomelo e hlokahalang feela ke phetoho ea nako le nako ea tsitsipano ea lebanta.

Matla a kamehla a fana ka li-pulleys tsa nako le mabanta a tsamaisanang le lifaele tse fapaneng ka lebaka la phapang ea molumo, boholo le sebopeho sa meno.
Re fana ka mefuta e fapaneng ea "pulley" ea nako e fumanehang ka mokhoa o ikhethileng hammoho le moralo o tloaelehileng ho latela tlhoko ea moreki. Re ikemiselitse ho fana ka boleng ba "pulley ea nako" e iqapetsoeng le ho etsoa ho latela maemo a machabeng mme ho bonolo haholo ho e kenya.

Li-pulleys tsa nako ke eng?

Li-pulleys tsa nako ke li-pulleys tse ikhethang tse nang le meno kapa lipokotho tse potileng bophara ba kantle ba 'mele oa pulley. Meno a nako a kenya masoba lebanteng la tšepe, ha lipokothong tsa nako li kenya lits'oants'o tsa mokokotlo oa lebanta. Meno ana kapa lipokotho li sebelisetsoa nako feela, eseng phetisetso ea motlakase.

Melemo ea linako tsa Pulleys

- E felisa ho thellela
- Mojaro o fokolang
- Litlhokahalo tse fokolang tsa sebaka
- Ho boreleli ho matha
- Tlhokomelo e nyane
- Moruo
- Boemo bo fokolang ba morao
Ho boloka matla

Kamehla matla a etsa mefuta e mengata ea li-pulleys tse tloaelehileng ho fihlela boholo ba litlhoko tsa hau tsa kopo. Litekanyetso tse tloaelehileng tsa nako tse entsoeng ke rona li kenyelletsa:

1/5, sekontiri se metsi XL Series

Li-pulleys tsa rona tsa XL li potlakile ebile ho bonolo ho li kenya le ho li lokisa. Tsena li sebelisoa haholo mechineng ea ho sila, mochini oa lisebelisoa, mechini ea ho cheka le makhetlo a mang a phetisetso ea mechini.

L Series, 3/8 sekontiri se metsi Nako Pulley

L rona L series Timing Pulleys li tla ka mefuta e fapaneng le khetho, ho netefatsa hore e tla lekana litlhoko tsa hau. Leano la rona ke ho theha pulley ea nako e phethehileng, e sa hlokeng mosebetsi oa bobeli ho bareki ba rona.

5mm sekontiri se metsi HTD Nako Pulley

Li-pulleys tsena li matlafatsoa ka ho kenya tšepe ho fana ka melemo e bobebe ea nylon hammoho le melemo ea khokahano ea tšepe le tšepe setsing. Kopano ena e fana ka karolelano e matla ea boima ba 'mele le inertia e tlase.

8mm sekontiri se metsi HTD Nako Pulley

8mm Pitch HTD Nako ea Pulley e entsoe ka ente e le litekanyetso tse thata tsa moralo oa 'nete, e u fang se nepahetseng seo u se hlokang.

Tšoaro ea motlakase GT2 Timing Pulley

Li-pulleys tsena li tšoaneleha hantle bakeng sa lits'ebetso tse batlang matla a phahameng a ho jara, hammoho le ho etsa index kapa ho ngolisa ka nepo.

re sebetsa ka mafolofolo ho hlahisa pokello e pharaletseng ea li-pulleys tsa nako. Litsebi tsa Ever-power li na le tsebo le boiphihlelo ba ho rala le ho hlahisa li-pulleys tsa nako bakeng sa sistimi ea hau tse tla fana ka liphetho tsa sehlahisoa se nepahetseng haholo, se phetoang. Kutloisiso ea rona e tebileng ea litlhokahalo tsa moralo bakeng sa li-pulleys tsa nako e tla netefatsa hore sistimi ea hau e ikemetseng e tla tšoarella bakeng sa palo e phahameng ea libaesekele tse khonehang.

Li-pulleys tsa lebanta la nako le li-bores tsa sefofane
Mekoallo e tloaelehileng ea meno
Li-pulleys tsa lebanta la nako le li-taper bores
Methati ea Metric Pitch Timing ea lebanta e nang le li-bores tsa sefofane
Mekoallo e tloaelehileng ea meno (Metric Pitch)
Li-pulleys tsa lebanta la "AT" Metric Pitch Timing le li-bores tsa lifofane
Mekoallo e meno e tloaelehileng (Metric Pitch "AT")
HTD Nako ea lebanta e nang le mabili a sefofane
Mekoallo ea meno a HTD e tloaelehileng
HTD Nako ea lebanta e nang le li-Taper bores
Nako ea Pulleys (European Standard)
Nako ea Pulleys (Pilot Bore)
XL037, L050, L075, L100, H075, H100, H150, H200, H300, XH200, XH300, XH400
Flanges bakeng sa Pulleys

Nako ea Pulleys (Taper Bore)
Sebopeho sa lipoleiti tsa nako
L050, L075,L100, H100,H150, H200,H300
Catalog ea Li-Bar tsa Toother tse Tloaelehileng
HTD Nako ea lebanta la HIM
Sebopeho sa li-Pulleys tsa nako ea HTD
3M-09, 3M-15, 5M-09, 5M-15, 5M-25, 8M-20, 8M-30, 8M-50, 8M-85, 14M-40, 14M-55, 14M-85, 14M-115, 14M-170
HTD Taper e tsoetse li-Pulleys tsa nako
Sebopeho sa HTD Taper se na le li-pulleys tsa nako
8M-20, 8M-30, 8M-50, 8M-85, 14M-40, 14M-55, 14M-85, 14M-115,
Methati ea Metric Pitch Timing
T2.5, T5(1), T5(2), T10(1), T10(2),
Libaka tsa meno a Toto T2.5, T5, T10
Methati ea Metric ea Mabanta
BAT5(1), BAT5(2), BAT10(1), BAT10(2), BAT10(3)
Bar e tloaelehileng ea Toother BAT5, Bat10

Kopo ea Khotheishene

sem, elementum adipiscing mattis at pulvinar porta.

Hlabella E ka la Pinterest